CLICK HERE to join The Vinyl People family on Facebook to be the first to see sales, new products & more!



Aspen - White Buffalo Plaid HTV (10" width)

Regular price $2.19

Aspen - White Buffalo Plaid HTV (10" width)

This is Heat Transfer Vinyl (HTV) intended for fabrics and must be applied with a heat press or iron.

*Please note that colors may vary slightly on electronic devices.

HTV Application Instructions:

HTV Instructions

  1. Load your design into your cutting software, don’t forget to MIRROR/REVERSE the design before cutting.
  2. Place HTV on your cutting mat with the gloss/patterned side facing down.
  3. Adjust proper blade speed and cutting pressure – a test cut is ALWAYS recommended.
  4. Weed away the excess slowly, leaving your design on the clear carrier sheet.
  5. Lay out your t-shirt/blank. Temporarily place your design (gloss/patterned side facing up) on the fabric to check for size/layout before continuing. Remove design.
  6. Set your heat press machine to 302°F to 320°F (varies by machine).
  7. Once your heat press has reached temperature, pre-press your fabric to ensure it is crease-free and completely dry before pressing design.
  8. Place your design on the fabric/t-shirt and position correctly.
  9. Press for 10-15 seconds at medium pressure.
  10. Gently peel the clear carrier sheet after a few minutes (cold peel).
  11. Check adhesion of HTV, if not adhered fully, place a teflon sheet or a piece of parchment paper over the decal and re-press for another 15 seconds.

DO NOT USE STEAM IF YOU ARE USING AN IRON TO APPLY HEAT TRANSFER VINYL.

Laundering: Wash warm or cold with mild detergent. Dry on normal.  Do not launder for at least 24 hours after application.